* DDNS function is available from V1.30 firmware version of DVR.(4ch,8ch,16ch) Please update DVR with V1.30 if DVR firmware version is under V1.30.

* DDNS function using Remote Viewer is available from version 1. 10, 12, 13. If your Remote viewer is under this version, please contact your vendor.

* First, you need to register your DVR info on DDNS Web-server.

A. Registration DVR at Internet Browser (DDNS Web-server)

1. Please access www.j2kip.com and click Register to register Member ID.
   
    
2. Please click DVR Add to register DVR.
   
    
3. Please click confirm after inputting DVR information.
   
    
4. Now, DVR is listed on DDNS web server and it is ready to use Web-Viewer.
   
    

B. DVR

1. Go to Menu -> External Device -> TCP/IP Setup
2. Dynamic IP : Select AUTOMATIC at DHCP Setup
   Static IP : Select MANUAL and input IP/DNS information manually
   
    
3. In case of Dynamic IP, execute DETECT IP to get IP information.
   
    
4. Select DDNS SETUP.
   
    
5. Set DDNS ON/OFF to ON.
   DNS SERVER : In case of static IP, User should input DNS address manually.
   In case of dynamic IP, DNS address will be automatically assigned.
   
    
6. Go down to REGISTER and push ENTER button to renew IP registered on DDNS SERVER. (Interval means connection interval time between DVR and DDNS SERVER.)
   D = Day, H = Hour, M = Minute
   
   
   Now DDNS setup at DVR is finished.

Note: Before using Web-Viewer, please add www.j2kip.com on Trusted Sites at first installation as follows. (Tools -> Internet Options -> Security)

C. Web Viewer

1. Please click the following icon to execute Web-Viewer.
   
   
    
2. The following Web-Viewer will pop up. Press connect to see the Live image.
   
   
    
3. You can see the Live image.